National Paints ULB Series is an Ultra Low Bake Powder Coating system. It is available in a variety of colors as per RAL card, custom made shades in Sand Texture, Course Texture, Hammer Tones & Metallic Finishes are also available.
NP ULB Series has been designed for use as powder coating finish on MDF. The product provides an alternative to the liquid coatings, paper foils and vinyl laminates currently used for MDF. It’s extremely durable and are available in a wide range of colors and textures. Its reclaimable, safe and environmentally friendly. NP ULB Series can also be used on other heat sensitive substrates using a traditional thermal curing method.
KEY FEATURES:
- Available if full range of colours, any special colour can be matched as per customer’s requirement.
- Available in different finishes, fine and heavy texture pattern, sandy and hammer tone finishes.
- Environmentally friendly coatings comparing with conventional liquid paints & varnishes.
- One coat application process similar to conventional powder application systems.
- Excellent application properties, charging, transfer efficiency, and edge coverage.
- Less sanding required for MDF products comparing with normal paints & varnishes.
- Significant energy, time and space savings.
- Low temperature cure permits wide range of wood substrates to be powder coated
POWDER PROPERTIES:
|
: : : : : |
Epoxy/Polyester Suitable for electrostatic spray 1.2-1.7 g/cm³ depending on colour Dry cool conditions below 30°C 6 months |
SUBSTRATE:
|
: : : : : : : |
18mm Medium Density Fibreboard >750gm/cm3 8-10% Main side requires very less surface preparation, edges should be sanded or treated to minimize the out gassing and pin holing. Normally grit paper is recommended to get the typical smooth surface. 2 – 3 minutes at 130°C 25 – 30 minutes at 130°C 60-80 μm |
For more specifications, please contact us with our sales representatives.
Coverage Calculator
 |
| NP Powder Coating |